loader
MY ACCOUNT
SIGN IN

Welcome back! Sign in to Your Account

Help?
or
CREATE NEW ACCOUNT

Create your very own account

SLEEK COAT (CEMENT BASE PUTTY)
SLEEK COAT (CEMENT BASE PUTTY)
SLEEK COAT (CEMENT BASE PUTTY)
  • image description
  • image description
  • image description
  • image description

SLEEK COAT

SLEEK COAT is an adventure in polymer technology in service of the building industry, by means of elimination of plaster putty and paint. It is a composite of inorganic and organic binders, inert fillers and lightfast coloured pigments with multieffect additives, On curing if forms a tough, non - cracking, water and fungus resistant film on the substrate where it is applied.

A single component Plaster / Putty cum paint

SLEEK COAT is an adventure in polymer technology in service of the building industry, by means of elimination of plaster putty and paint. It is a composite of inorganic and organic binders, inert fillers and lightfast coloured pigments with multieffect additives, On curing if forms a tough, non - cracking, water and fungus resistant film on the substrate where it is applied. Being supplied in white or other light colour shades, it serves the purpose of interior paint on newly constructed building walls is a breathing plaster hence ideal for new building structures. It absorbs water but does not swell becomes sot and peels off from the surface like other synthetic plasters and putty.


BENEFITS:
  • Single component.
  • Easy to mix with water and easily applicable by trowel.
  • Non - slip type - does not sag on application both on ceilling and vertical substrates.
  • Forms tough, hard, noncracking and washable coating.
  • Can be applied to any thickness in multiple layers. Bond strongly to cement plasters, asbestos, cement bonded particle board substrates.
  • Breathing property allows the wall to breathe and passes out internal water vapour.
  • Can be overcoated by water based or solvent based paint.
  • Water resistant.
  • Withstands all climatic conditions whether cold or hot.
  • Excellent light shades can be obtained with universal stainer.


END USES
Building walls and ceilings from inside.


TECHNICAL CHARACTERISTICS:

Nature & appearance
:
Single pack homogenious, uniform free flowing powder
Bulk density
:
1.5 ± 0.005 gm/cc.
% Non volatile matter
:
99.96 ± 0.20% bywt.
Mixing ratio with water:
:
w/p = 0.40 -0.45
Application time at 30°C
:
1 - 1 1/2 Hours
Initial setting time at 30°C
:
24 Hours

Complete curing time at 30°C

:
3 - 4 days. Curing can be enhanced by sprinkling water on the plaster.
Finish
::
Smooth, can be improved by polishing with fine emery paper.
Water resistance
::
Excellent
Paintability   Excellent can be overcoated by water based or solvent based paints.

DIIRECTION FOR USE:

The surface must be clean, without any dirt, dust and mould release oil or any water repellent coating. Mix powder with recommended water to form a homogenous, uniform lumps - free paste. Apply with steel trowel to level or required thickness on the substrate. Use wet trowel to level the surface. After 24 hours of drying smoothen the surface by using fine emery paper. It is advised to cure the plaster with fine spray of water.

(1) STORAGE & SHELF LIFE:

Store at a cool an dry place. Shelf life is 6 months from the date of manufacture.

Not Found